More Views

POLYKLEEN OXY (Epoxy Grout Haze Cleaner)

Quick Overview

PROPERTIES

PolyKleen Oxy is a biodegradable, cleaner designed to remove and clean epoxy grout haze.

AVAILABLE SIZES

250 ml kit with sponge and 1 L

 

Availability: In stock

$0.00

* Required Fields

$0.00

Details

POLYKLEEN OXY EPOXY GROUT HAZE CLEANER

ON WALLS OR ON FLOORS...

Whether you install POLY 800 PRECISION on a wall or on a floor, one golden rule must be followed: a 15 to 20 minute period should be calculated from the end of the application to the start of cleaning. This period will allow the grout to be secured in the joint, preventing it from caving in during cleaning. The temperature greatly influences product performance: the higher the temperature in the room, the quicker the reaction will be. However, if the ambient temperature is cooler, you will have more time to apply and clean your grout.

CLEANING

For cleaning, you will need the following tools: a scouring pad (epoxy sponge), high density sponges (yellow), and a few buckets of clean water. It’s important to wait 15 to 20 minutes before the start of the cleaning process. The first step is to scrub the grouted surface with a high density sponge or with the help of a scouring pad, in a circular motion, to loosen the resin on the surface of the tile. Scrub an area of about 10 square feet. Then, using the slightly moistened yellow sponge, go over the same area diagonally toward the joints while pressing firmly. If necessary, you can go over a second time to remove any remaining haze between 30 to 60 minutes after the first step. Within 24 hours of the application, you can use a soft scouring pad with soapy water to remove any remaining grout residue from the tiles. After this time, you will need to use POLYKLEEN OXY to bring the tile back to its original state.

Additional Information

Download
PDFTech. Data Sheet PDFMSDS