More Views

NIVEX (Superior Self-Levelling Mortar)

Quick Overview

PROPERTIES

  • Fast-setting, polymer-reinforced, very high-quality leveller.
  • Easy to prepare.
  • Recommended for covering heating cables.
  • Does not require the application of a primer if the installation is done on new exterior-grade plywood, or on new 30-day-old concrete that has not been modified by curing compounds or other contaminants.
  • All concrete over 30 days old must be primed with PX PRIMER.

TECHNICAL DATA

Initial set: 2 to 4 hours (depending on temperature)

Can level up to 1’’ thick per application.

COVERAGE

22.7 kg (50 lbs) covers 25 sq.ft. at a thickness of 1/4’’ 

AVAILABLE SIZES

22.7 kg (50 lbs), 49 per skid

4.5 kg (10 lbs), 4/case

Availability: In stock

$0.00

* Required Fields

$0.00

Details

NIVEX SUPERIOR SELF-LEVELLING MORTARS

PROFIX self-levelling mortars are composed of polymer-reinforced hydraulic cement. They are used for the patching and levelling of indoor floors. When mixed with water, these products become fluid, and level off almost effortlessly, leaving a smooth and durable surface for the installation of your floor covering. It is important to note that this type of product does not have the same bonding strength as a mortar designed for tile installation. Therefore, in most cases, a primer must be applied on the substrate before the self-leveller. For best results, we recommend working non-stop when using these products.

PRIMER

PX PRIMER is a liquid that is applied before the application of a self-leveller or other type of mortar to help its adhesion to the substrate. A primer is not a magic solution! In some curcumstances, preparatory work must be done beforehand. You can use a primer before installing a tile adhesive on highly porous concrete. For questions, please feel free to call our customer service at 1-800-463-6850.

Additional Information

Download
PDFTech. Data Sheet PDFMSDS


LEED POINTS:

PDFLeed-QEIc3.2

PDFLeed-QEIc4.1

PDFLeed-MRc4.1

PDFLeed-MRc4.2