More Views

Flex GT-30 (Thin-Set or Medium-Bed Mortar)

Quick Overview

PROPERTIES

  • Ideal for installing large tiles horizontally and vertically.
  • High performance. 
  • Polymer-reinforced. 
  • For residential, commercial use. 
  • Recommended for covering and installing on in-floor heating. 
  • Shear strength (porcelain on porcelain): 450 psi. 
  • Meets or exceeds ANSI A118.4 and A118.11. 

COVERAGE

22.7 Kg covers 65 sq.ft. (1/4’’ X 3/8’’ trowel)

AVAILABLE SIZES

LIGHT GREY – 22,7 kg (50 Lbs), 49 per skid
GREY – 22,7 kg (50 Lbs), 49 per skid

Availability: In stock

$0.00

* Required Fields

$0.00

Details

 

FLEX GT-30 THIN OR MEDIUM-LAYER MORTAR

Flex GT-30 is a high-performance polymer-fortified thin-film mortar for laying ceramic tiles on the floor, wall, inside and outside.


What is Flex GT-30?

Large-format tiles are increasingly popular in the market for tiles and natural stones. The Flex GT-30 solves two installation problems for this type of tile:

Horizontal installation: When installing large-format tiles, their weight can cause the mortar to sag under the tile. So there is less mortar under the tile, which can cause adhesion and level problems. The Flex GT-30 allows the installation of large-format tile while reducing sagging, as it can be used as a medium-layer mortar.

Vertical installation: The Flex GT-30 has a creamy texture that provides better slip resistance, making it easier to vertically install tiles.


Pot life

It is recommended that you never add water after the initial mixture. If the mortar becomes more dense in the boiler, mix it, without adding water, using a blender designed for this purpose. Too much water will dilute the product and the results are unpredictable and variable.

Additional Information

Download
PDFTech. Data Sheet PDFMSDS


LEED POINTS:

PDFLeed-QEIc3.2

PDFLeed-QEIc4.1

PDFLeed-MRc4.1

PDFLeed-MRc4.2

PDFLeed-MRc5.1

PDFLeed-MRc5.2